Axis 'slippage' on large prints (6 replies)
Hi, I built RepRapPro Mendel last year and have been slowly tweaking it to get batter quality prints. However I've found that I get, what looks like, terrible belt slippage on the x & y axis on...
View Articlestart costruzione prusa i3 box (3 replies)
ciao ho iniziato a costruire la prusa i3 box frame e iniziano i problemini, perchè immagino che i problemoni verranno dopo... nello specifico nell'immagine allegata il pezzo ha i buchi da 8 mm ma...
View ArticleTremblement de servo moteur (no replies)
Bonjour à tous, Je souhaites piloter un servo RC avec ma ramps 1.4 et marlin (qui possède la fonction d'autolevel et donc la library "servo") mais celui ci tremble telle une vache folle dés que les...
View ArticleMultiple Object Issues (no replies)
I am trying to slice multiple objects in Repetier-Host Solidoodle, and every time I try to slice the objects, it will only select one object and slice it. Maybe this is a stupid question, but please...
View ArticleBug in Pronterface nozzle graph while USB printing (2 replies)
Hi there! There is a problem with the Pronterface graph. When I start Pronterface and connect to the printer, I click "watch" to see the bed and nozzle temperature. This works perfectly fine, both of...
View ArticleProblem with Y-axis (no replies)
Hi guys, I have Prusa Mendel i2 printer with Sanguinololu, Sprinter firmware. I was printing with my printer for a long time. Today, I connected the printer and started printing but a problem...
View ArticleX Carriage with enlarged runner bearing slot (2 replies)
Hi guys, I modified this for myself but thought others may find it useful too, Its the original X-carriage part with the runner bearing slot/nut trap enlarged to provide greater adjustment....
View ArticleQuestion aux Reprapers à propos des moteurs pas à pas (2 replies)
Salut, j'étudie la fabrication d'une machine qui n'a pas grand chose à voir avec les repraps mais j'envisage d'utiliser un moteur pas à pas afin de générer un mouvement linéaire avec une courroie et...
View ArticleProblema scorrimento cuscinetti (2 replies)
Ragazzi ho un problema ho comprato barre liscie in acciaio ma i cuscinetti lineari non scorrono. Non vanno bene le barre in acciaio, bisogna prendere obbligatoriamente quelle in ferro temprato...
View ArticleMendel Ramps 1.4 Arduino - no connection (no replies)
I completed the assembly and wiring of my Prusa Mendel i2. Having installed all the software on my PC, I connected the Arduino USB cable to the PC. No lights were shown on the Arduino and the PC...
View ArticleHotend Stuck at 357 Degrees (7 replies)
My Hotend is reading at 357 degrees for some reason and wont change. I have made sure that the thermistor is connected to the right slot, and I've even resoldered the wires to make absolutely sure....
View ArticleWhy is Infill related to Layer Height? (no replies)
I just did two prints. (Slic3r 1.0.0RC2) 0.4 layer height with 10% infill and 0.2 layer height with 10% infill The rectilinear infill for the 0.4 height is infill squares ~5mm The rectilinear infill...
View ArticleFirmware not working on delta-pi with RAMPS 1.4 and mega 2560 (no replies)
I have finished the hardware of my first reprap, a delta-pi. Now I'm starting with the firmware, I get a very strange problem. I can install the firmware (arduino software says the upload is OK), but...
View ArticleHelp Please (Trying to Commission the Printer) (6 replies)
Hi help please... Ok guys, now I'm stuck.... I'm trying to commission the printer, but it doesn't seem to want to know. I'm using Windows 8.1 here... The Printer is showing up in devices as being on...
View ArticleRepetier Software along side azteeg x3 (no replies)
I was curious if anyone knew the best choice for installing Repetier Host software for windows 7 OS, 32 bit or 64 bit. Divers for the USB seem to be in 32 bit, I would have to recheck to verify. The...
View ArticleShelving on my prints! (1 reply)
So ever since my mendelmax1.5 started printing some months back it has been doing this really annoying thing where it makes rings on the printed object. Here's what it looks like: [attachment 25083...
View ArticleUpdated commissioning instructions (5 replies)
I have updated the commissioning instructions - [www.reprappro.com] I've been getting a lot of emails from people with proximity probe problems, homing problems, pronterface problems, network problems...
View Articlemotors getting hot? (no replies)
Is it normal for my motors to be really hot? After printing for an hour, my motors are so hot I can only touch it for 1 second before I burn myself. What is a normal operating temperature? I have a...
View ArticleJust a reminder about SD-card formatting (no replies)
I didn't know how fast an SD-card should be. The card that came with my electronics was delivered by G3D with the LCD panel. So, it almost never wanted to eject and was terribly slow to write to....
View Article