My Hotend is reading at 357 degrees for some reason and wont change.
I have made sure that the thermistor is connected to the right slot, and I've even resoldered the wires to make absolutely sure. I've also checked with sprinter firmware and found out that the Marlin firmware is not actually the problem. Sprinter is also reading my hotend at 357 degrees despite it being cold as ice.
I checked online and someone had the same problem but they had accidentally reversed the thermistor connection with the hotend connection. I have double and triple checked this and this is not the issue. Ive even resoldered the wire. Any ideas?
I have made sure that the thermistor is connected to the right slot, and I've even resoldered the wires to make absolutely sure. I've also checked with sprinter firmware and found out that the Marlin firmware is not actually the problem. Sprinter is also reading my hotend at 357 degrees despite it being cold as ice.
I checked online and someone had the same problem but they had accidentally reversed the thermistor connection with the hotend connection. I have double and triple checked this and this is not the issue. Ive even resoldered the wire. Any ideas?