Advice needed: Large printer, whats worth the price? and other things. (1 reply)
Hello, I am new here and want to build my first 3D printer for making 1:1 scale prototypes for work and to just have fun. I have been reading around for months and dreaming of having my own 3d printer...
View ArticleRecent issue printing detailed holes (3 replies)
Hi all - I have a Mendel90/Sanguinololu/Sprinter using a Wades extruder/ 0.5 mm nozzle, a fan (always on) & heated bed with 3mm PLA. I use Repetier/Slic3r. I have dialed in some pretty decent...
View ArticleHow many motors can a pololu run ? (3 replies)
Quick questions. Can the ramps set up with pololu stepper drivers run three or four stepper motors at the same time with out over heating. It can obviously run the 2 for the z axis (but these are only...
View ArticleExtra shells not touching perimeter (skeinforge) (no replies)
An annoying issue has cropped up while printing the parts to build my I3. It seems that the extra shells that print are not touching the perimeter and there is a noticable gap. I'm using skeinforge...
View ArticleClik here to view.
Printing on 1/32 thick Garolite (2 replies)
I have been printing PLA on tape, and ABS or Nylon on 65% Polyester / 35% Cotton RipStop fabric spray-mounted with 3M HiStrength-90 glue to thick glass. The fabric has been working well on certain...
View ArticleClik here to view.
Trying to get started. I have some things already. (1 reply)
My friend is going to let me borrow his 3d printer so I assume I can print the plastic parts that I would want to use. I also have some decent stepper motors out of some HP 9050's. I also have a...
View ArticleMendel Prusa- x end brechen (4 replies)
Hallo, Die x entstücke sind Eigendruck, will ich eine M8 Stange reinstecken geht es nicht. und mit Gewalt bricht es. Was könnte ich tun ?
View ArticleClik here to view.
NextEngine 3D Scanner (no replies)
NextEngine 3D Scanner The NextEngine 3D Scanner captures objects in full color with multi-laser precision. Breakthrough technology has made it the World's most popular 3D Scanner, with thousands of...
View ArticleDoubt Regarding some error messages (1 reply)
I am using RepRapPro huxley 05-03,I have printed some objects with this machine.After a long time again i used the machine while i giving the printing command it shows the error signal as MINTEMP...
View Article3D files of Prusa I3 single sheet version (IGES/STEP) (no replies)
Hi Everybody, me and my brother are planning to build a Prusa I3. We already bought the most of the materials and want to start with it next week. For us it would be great to have a 1:1 3D model of...
View ArticleMendel90: Oberflächenproblem?? (no replies)
Hallo, ich bin neu beim 3D Drucken und habe eine frage! Hab mir einen Mendel 90 Bausatz gekauft und zusammengebaut. Der Drucker funktioniert, allerdings hab ich das Problem das ich bei den Oberflächen...
View Articlefilament probleme? (4 replies)
hallo, ich habe bei multec 2 rollen abs filament bestellt. die erste druckte ich ohne probleme. nachdem ich dann auf die zweite rolle wechselte, fingen die probleme an. ich druckte ein größeres...
View ArticleDrucken mit PET (1 reply)
Hallo Gemeinde, hat jemand schon einmal mit PET gedruckt? Ist es mit Stoffel`s Extruder möglich? Gibt es da bereits 1,75 mm Kunststoffdraht zum testen? Danke und Gruss Angelo
View Articlevenditore italiano (1 reply)
Buon girno a tutti ho trovato questo venditore italiano [www.diyreprap.com] qualcuno ha gia' comprato io ho preso le bussole igus per i filamenti mi sembrano dei buoni prezzi
View Articleprinted bevel gears for electric outboard motor (no replies)
hi, recently i found an interesting fishing spot near this town i often go to for shopping and ect, its called sarina, small town. i found out theres a very wide and deep still water creek running...
View ArticleVelocità di stampa (4 replies)
Ciao a tutti, Volevo fare un piccolo confronto in merito alla velocità cui stampate i vostri oggetti. Io con la mia sharebot pro 2 estrusori stampo da 20 mm/s se devo fare scritte piccole a 70-100...
View ArticleRight Z axis lead screw slipping (2 replies)
[EDIT: Ignore this message - have really tightened coupling hard, seems to be OK for now] My M90 is operational. (Everything worked first time!) I'm trying to level the bed along the X axis. Levelling...
View ArticleDual Extruder mit einen MendelMax 1.5 (1 reply)
Einen wunderschönen Tag Background : ich habe vor ein paar Wochen über reprap.cc ein MendelMaxKit bestellt, bekommen und ordentlich zum laufen gebracht. Jetzt wird es Zeit die Maschine zu erweitern....
View Article