Repetier Firmware: h-gantry + steps-per-mm (no replies)
Hi, I am testing a classical h-bot gantry with the Repetier-Firmware. So far, the movement direction and the endstops are working fine. However, the movement distance along the X and Y axis is not...
View ArticleStavba vlastního Hot-end na Prusa i2 (no replies)
Zdravím, nemáte někdo zkušenost se stavbou vlastního hot-endu na Prusa i2 ??? Ty kupované mi přijdou dost drahé na to že na tom toho moc není. Jaké dodržet zásady při návrhu, výrobě a nastavení....
View ArticleLooking for PTFE Tubing (no replies)
I read an old posting from 2010 about PTFE tubing and where to get it, those suppliers seem to have disappeared now so can anyone help me with current suppliers. I don't want to buy off eBay unless...
View ArticleCubehero discussion sections now available for all project physibles (no...
Just as a quick followup to last week's announcement, now discussion sections can be created for all physible projects. I detailed it in a quick blog post, but you can check it out directly. Soon, you...
View ArticleProblema oggetto vuoto, niente supporto (1 reply)
Salve a tutti, Sto avendo problemi per stampare oggetti vuoti( mi spiego meglio...architetture,stanze, edifici in genere dove vorrei avere solo le pareti) Ho notato in vari casi il file mi viene...
View ArticleMM2 -- laser cut parts - Price reasonable? (3 replies)
Received the first quotation from a local firm for the 23 laser cut parts. (waiting for 2 others) £64.50 inclusive of tax and collect from their workshop. Front and back plates, top and bottom...
View ArticleDruck wird nicht Rund gedruckt (10 replies)
Hallo, grüßt Euch. Kann mir Jemand behilflich sein. Habe in der Firmware die Geschwindigkeiten angepaßt. Die Kalibrierung steht und stimmt. Aber wenn ich einen Kreisrunden Ring drucke, realisiert er...
View ArticleAdvice on PLA filament... (no replies)
Hello Gang! Haven't printed yet. Have a reel of black Octava ABS, but also want to try PLA when I'm finally printing. What is a good manufacturer? Any to stay away from? moisture, filament voids,...
View Article3D Printer/Scanner/Modeling Software on Kickstarter - Looking for feedback (7...
Hey everyone, Before I write anything else, we are looking for feedback on our printer, scanner, and modeling software combination. I work at Radiant Fabrication and we just launched our 3D printer...
View ArticleProblem mit Filamentvorschub (1 reply)
Hallo, ich habe da ein Problem... ich habe einen Mendel Prusa i2, Wade Extruder, Hotend von Wolfgang (Stoffel15), Dauerdruckplatte von mtplus. Bisher habe ich natürliches PLA gedruckt, das hat auch...
View ArticleChange Repetier LCD display tp show x and y coordinates (no replies)
Ok so I'm wondering what lines to change if possible to allow my LCD to show x and y coordinates? Ok so after playing around I got it Working!!!! in uimenu.h find the following:...
View ArticleFragen über Fragen (2 replies)
Hallo, ich bin ein Neuling und verstehe nicht wie man die Firmware auf das board lädt könnte mir das jemand erklären? Ich hab ein Ardunio Mega 2560 Board. mfg dimon
View ArticleControl RapRap from an Arduino UNO (1 reply)
I have build a little control panel with an LCD display that I would like to connect to my RepRapPro. Can I connect the Arduino UNO's USB to the Melzi USB? Firstly will it work, and if so does a cable...
View ArticleRun Slicer on a Server ? (no replies)
Hi all, I was wondering if there was a way to run slicer on a server and then get the gcode files and then 3d print them, I have looked around the forum but have not found anything related to this, so...
View ArticleTrous dans les couches de remplissage (1 reply)
Bonjour, J'ai monté une Prusa i3 il y a peu et commence à imprimer mes premières pièces tout en apprenant à ajuster les paramètres (config: Sprinter/Slic3r/Pronterface)... j'obtiens des résultats...
View ArticleSetting the Platform Size (1 reply)
I am trying to use skeinforge to generate gcode for a Solidoodle but I cannot find where I set the size of my build platform. Can anyone help? Thanks.
View ArticleClik here to view.
Nerezový hotend (1 reply)
Podařilo se nám udělat nerezový hotend, tedy nerezová tryska je v jednom kuse spolu s heatbreakem. Aktuálně to je 0.5mm na 1.75mm filament. [attachment 18919 tryska.png] Jsou to 3 díly: - tryskobrzda...
View ArticleRAMPS board appears to have blow up Arduino :-( (no replies)
Hi, While doing some basic setup on my new mendelmax I was testing the limit switches using Pronterface to drive the motors up and down. I pressed Motor stop and made started to move one of the limit...
View Articleusb-ttl converters question (no replies)
Hi, Ive been looking around everywhere, and have had no luck so far finding the answer to ths question: I see some people say that they use the FT232 chips, others use ATTiny chips, cp210 chips, or...
View ArticleHoles and gaps on top! (no replies)
I get consistently good quality prints with my Replicator 1 clone 3D printer, even at fast (80-100mm/sec) speeds and low layer heights, the surfaces are nice and clean, and the prints are otherwise...
View Article