Hello All
Well I have been having loads of issues with the "Bed Plane Compensation" where I am having to do it before every print due to any slight movement like even removing the last printed item or even cleaning the bed after the print changes the previous setting.
So I have opted for a 3mm aluminium sheet 500mm x 300mm (so it will need to be cut to size and use the bed-insulator as a template) along with a 19.05mm x 19.05mm square rod to be cut to replace the "nozzle-mount" will also need a few holes drilled then cut and filed to size.
Along with loads of 20mm M3 Socket head cap screws, washers, locking washers and hex nuts.
Hopefully with the above changes (if all goes well) I should have a level aligned bed and a nozzle mount that doesn't melt or soften resulting in sagging after long prints.
The above items etc should arrive over the next couple of days, so if all goes well I will post some pictures of the changed items.
Ian, I will try and return the faulty Duet board some time next week, I will also email you the Tracking code and don't worry about refunding the return costs, shouldn't be that much anyway.
Paul
Well I have been having loads of issues with the "Bed Plane Compensation" where I am having to do it before every print due to any slight movement like even removing the last printed item or even cleaning the bed after the print changes the previous setting.
So I have opted for a 3mm aluminium sheet 500mm x 300mm (so it will need to be cut to size and use the bed-insulator as a template) along with a 19.05mm x 19.05mm square rod to be cut to replace the "nozzle-mount" will also need a few holes drilled then cut and filed to size.
Along with loads of 20mm M3 Socket head cap screws, washers, locking washers and hex nuts.
Hopefully with the above changes (if all goes well) I should have a level aligned bed and a nozzle mount that doesn't melt or soften resulting in sagging after long prints.
The above items etc should arrive over the next couple of days, so if all goes well I will post some pictures of the changed items.
Ian, I will try and return the faulty Duet board some time next week, I will also email you the Tracking code and don't worry about refunding the return costs, shouldn't be that much anyway.
Paul
