I noticed something a bit weird today which may or may not be causing some adhesion problems I am experiencing (PLA on glass bed @ 60 degrees). When I slice a 3mm thick walled object with an extrusion width of 0.5mm (0.35mm nozzle, 0.2mm layer height, number of loops = 3) kisslicer generates 4 perimeters (with no fill) instead of what I assumed should be 6 perimeters. Any ideas what could be causing this, or is this the expected behaviour? I would have posted this over at the Kisslicer forums but they have been down for maintenance for days. Thanks.
Dan
Dan