So I made a bracket in autodesk inventor and exported it in STL. Its converted to G-Code with Slic3r as standard. When I printed the part, its bigger by a certain percentage, Like instead of 8mm as specified in Inventor, its 8.40mm on the printed part. Im using a Mendel. I included a picture with the dimension on the part and the options box for saving the file for STL. They are what I used to saved the file to STL. What are the settings I should you use to export the stl file to print the object with the correct dimension for the object I drew?
![xdx7.jpg]( "xdx7.jpg")
