Prusa Air 2 build budget costing (1 reply)

Hi Guys

After some of our discussions on whatsapp im posting what i think are the build costs for a basic Prusa Air 2 .
Of course these are just budget indicators and not exact prices

Acrylic frame S$ 100.=
Threaded & smooth 8 mm rods S$ 60.=
Nuts / bolts washers S$ 20.=
12 X LM8UU bearings S$ 12.=
2 X Z axis couplings S$ 18.=
3 X 608 bearings S$ 15.=
5 stepper motors S$ 100.=
3 X end stops S$ 20.=
2 X springs for Z back lash S$ 6.=
4 x springs for bed leveling S$ 8.=
T2 belt and drive pulleys ( X & Y axis) S$ 30.=
Gen6d control board S$ 120
Power supply ( 10 amp 12Volt) S$ 50.=
Cables , zip ties, cable sleeve, connectors S$ 20.=
Heated bed kit ( bed + alu plate + bor glass) S$ 48.75
Extuder ( j head - romscraj - budha) S$ 75.=
Extuder plastic parts bearings S$ 25.=
Plastic parts ( bar ends, X ends, bear holder etc S$ 45.=
total S$ 772.75