Item:
Mendel Parts Orca v.043 Fully assembled 3D printer
Item description:
Orca v0.43 fully assembled is a pre-built machine that is plugnplay, ready to print. It will be build and tested in-house before it will be shipped.
(note: we will sell these fully assembled machines limited, therefor this product can be out of stock at times).
The machine has a heated bed and can print ABS and PLA (bio-)plastic (and more materials).
(note: when printing ABS often, its recommended to take ABS printed parts, due to the high bed temps needed for ABS)
Included are things like spare parts (bolts, nuts, bearings, etc), cable ties, some tools, memory stick with software and more)
Orca v0.43 has a footprint of 28 x 38 cm (or 11 x 15 inches).
Print volume is 25 x 22 x 19 cm (or 10 x 8,5 x 7,5 inches) for Orca v0.43
This product is excluding plastic filament.
For best quality, this machine comes with a 1.75mm hotend, if you need a 3mm hotend, this can be ordered seperatly in the webshop under extruder v10 (hotend + nozzle).
Anodised aluminium color: Black
For the printed plastic parts a color can be selected.
[copied from [www.mendel-parts.com]]
Item Condition:
Nearly mint - Item is sold because of lack of use, due to much travel. Printer was build in a workshop, so the assembly was conducted professionally.
Number Available:
1
Price: 850€
(Tax?): -
Payment Conditions: Cash, Item will be handed out personally.
Location:
Germany (Northrhine-Westfalia, Cologne)
Shipping Cost:-
Shipping Conditions:-
Contact Information:
Please contact me via PM. We then can switch to e-mail, phone or meet directly. Due to the pre-assembled status, I would not like to ship the item (risk of damage).
Photo attached: General Condition, ask for more detailed photos if wished.
Information: I know, being a new user might seem suspicious. But as I run a blog on 3d printing (adress upon request), you get my personal contacts via PM and I would like to sell the device face-to-face, you can be safe to deal with me. Additionally, I made "general" photos individualized with a "reprap.org" sign and todays date, to show that I am the owner.
The device itself works very well. It may be tuned with some hard-/software modifications, but it is definitely not misused via "Try&Error". Additionally, I ordered a glass plate for the heat bed in the exact measures, and other small build parts can be given on top.
Please send me a PM, it would be a shame to see such a good printer unused.
Best regards
Sebastian
Mendel Parts Orca v.043 Fully assembled 3D printer
Item description:
Orca v0.43 fully assembled is a pre-built machine that is plugnplay, ready to print. It will be build and tested in-house before it will be shipped.
(note: we will sell these fully assembled machines limited, therefor this product can be out of stock at times).
The machine has a heated bed and can print ABS and PLA (bio-)plastic (and more materials).
(note: when printing ABS often, its recommended to take ABS printed parts, due to the high bed temps needed for ABS)
Included are things like spare parts (bolts, nuts, bearings, etc), cable ties, some tools, memory stick with software and more)
Orca v0.43 has a footprint of 28 x 38 cm (or 11 x 15 inches).
Print volume is 25 x 22 x 19 cm (or 10 x 8,5 x 7,5 inches) for Orca v0.43
This product is excluding plastic filament.
For best quality, this machine comes with a 1.75mm hotend, if you need a 3mm hotend, this can be ordered seperatly in the webshop under extruder v10 (hotend + nozzle).
Anodised aluminium color: Black
For the printed plastic parts a color can be selected.
[copied from [www.mendel-parts.com]]
Item Condition:
Nearly mint - Item is sold because of lack of use, due to much travel. Printer was build in a workshop, so the assembly was conducted professionally.
Number Available:
1
Price: 850€
(Tax?): -
Payment Conditions: Cash, Item will be handed out personally.
Location:
Germany (Northrhine-Westfalia, Cologne)
Shipping Cost:-
Shipping Conditions:-
Contact Information:
Please contact me via PM. We then can switch to e-mail, phone or meet directly. Due to the pre-assembled status, I would not like to ship the item (risk of damage).
Photo attached: General Condition, ask for more detailed photos if wished.
Information: I know, being a new user might seem suspicious. But as I run a blog on 3d printing (adress upon request), you get my personal contacts via PM and I would like to sell the device face-to-face, you can be safe to deal with me. Additionally, I made "general" photos individualized with a "reprap.org" sign and todays date, to show that I am the owner.
The device itself works very well. It may be tuned with some hard-/software modifications, but it is definitely not misused via "Try&Error". Additionally, I ordered a glass plate for the heat bed in the exact measures, and other small build parts can be given on top.
Please send me a PM, it would be a shame to see such a good printer unused.
Best regards
Sebastian