hola quisiera saber si alguien me puede ayudar a configurar en sprinter y marlin el siguiente thermistor.
no se muy bien que parametros ponerle al createTemperatureLookupMarlin.py
100K ohm NTC 3950-1% Thermistor
Part number: HB2-100K-3950-1
Head diameter: 2.0mm
Electrical characteristics
（Resistance value）: R（25°C）=100KΩ±1%
（B value）: B=3950 (calculated from resistance value at 25°C and 50°C)
Insulation resistance 50MΩ or over by DC500V megge (between glass and lead wire)
Thermal time constant (τ): τ=10～17 s ( in still air)
Thermal dissipation constant (δ): δ=1.1～1.6mW/°C (静止空气中in still air)
Operating temperature range:-50~+260°C
no se muy bien que parametros ponerle al createTemperatureLookupMarlin.py
100K ohm NTC 3950-1% Thermistor
Part number: HB2-100K-3950-1
Head diameter: 2.0mm
Electrical characteristics
（Resistance value）: R（25°C）=100KΩ±1%
（B value）: B=3950 (calculated from resistance value at 25°C and 50°C)
Insulation resistance 50MΩ or over by DC500V megge (between glass and lead wire)
Thermal time constant (τ): τ=10～17 s ( in still air)
Thermal dissipation constant (δ): δ=1.1～1.6mW/°C (静止空气中in still air)
Operating temperature range:-50~+260°C
