Summer is in full swing and we are working hard. Changes are constantly being made around us, and so we would like to share with you a few interesting pieces of information from the G3D Garage!
1. First of all, we are glad to inform you that we have launched our second store in Poland. From here we will send shipments to all of our European customers. The store is available at www.gadgets3d.eu
2. A few new products from our summer offer:
G3D Cooling Plate (pre-assemlbed)
Every electronic device need a correct cooling. With G3D Cooling Plate your RAMPS is safe from overheating. Stepper drivers in your printer can work smoothly with outputing maximum power.
G3D Worldwide: http://gadgets3d.com/g3d-cooling-plate
G3D Europe: http://gadgets3d.eu/g3d-cooling-plate
G3D eBay: http://stores.ebay.com/g3d
![]()
G3D Fan Splitter:
G3D Fan Splitter let you to connect up to 17 fan coolers/LED's and contain 2x PWM output.
G3D Worldwide: http://gadgets3d.com/g3d-fan-splitter
G3D Europe: http://gadgets3d.eu/g3d-fan-splitter
G3D eBay: http://stores.ebay.com/g3d
![]()
G3D Cooling Plate + Fan Splitter (FULL SET)
Every electronic device need a correct cooling. With G3D Cooling Plate your RAMPS is safe from overheating. Stepper drivers in your printer can work smoothly with outputing maximum power. Currently nobody offers this kind of solution. You'll be able to avoid all the problems with overheating your electronics. G3D Fan Splitter let you to connect up to 17 fan coolers/LED's and contain 2x PWM output.
G3D Worldwide: http://gadgets3d.com/g3d-cp-fs
G3D Europe: http://gadgets3d.eu/g3d-cp-fs
G3D eBay: http://stores.ebay.com/g3d
![]()
3. We have conducted a survey among our customers as well as among people strongly connected with the RepRap community - we asked what kind of problems are frequently encountered during the process of making your own RepRap printer?
The answer was very straightforward: Difficulties in the accessibility of parts, long periods of time required to gather all necessary parts to assemble the printer. Surely, each one us has had to order parts from many sellers, pay for shipping a few times, and finally wait until all the packages arrive at their destination. Later came the time-consuming task of searching for the instructions of assembly, printer configuration settings and software.
We want the RepRap to be in most homes - that is why all the necessary parts required to build your own printer will be available in our offer.
We are currently preparing some last things, in order to make available to you ready materials and elements to build your own 3D printer for a low price.
The star of this summer is the RepRap Mendel Max 1.5, which will be avaialble in a few days. Shortly, the RepRap Prusa i3 will also be available in our offer :)
G3D Mendel Max 1.5 ($499/379€)
![]()
![]()
![]()
![]()
![]()
Join us on Facebook, the daily news about 3D printing technology :)
Facebook: www.facebook.com/gadgets3d
All the best,
Rafal
GADGETS3D
1. First of all, we are glad to inform you that we have launched our second store in Poland. From here we will send shipments to all of our European customers. The store is available at www.gadgets3d.eu
2. A few new products from our summer offer:
G3D Cooling Plate (pre-assemlbed)
Every electronic device need a correct cooling. With G3D Cooling Plate your RAMPS is safe from overheating. Stepper drivers in your printer can work smoothly with outputing maximum power.
G3D Worldwide: http://gadgets3d.com/g3d-cooling-plate
G3D Europe: http://gadgets3d.eu/g3d-cooling-plate
G3D eBay: http://stores.ebay.com/g3d
G3D Fan Splitter:
G3D Fan Splitter let you to connect up to 17 fan coolers/LED's and contain 2x PWM output.
G3D Worldwide: http://gadgets3d.com/g3d-fan-splitter
G3D Europe: http://gadgets3d.eu/g3d-fan-splitter
G3D eBay: http://stores.ebay.com/g3d
G3D Cooling Plate + Fan Splitter (FULL SET)
Every electronic device need a correct cooling. With G3D Cooling Plate your RAMPS is safe from overheating. Stepper drivers in your printer can work smoothly with outputing maximum power. Currently nobody offers this kind of solution. You'll be able to avoid all the problems with overheating your electronics. G3D Fan Splitter let you to connect up to 17 fan coolers/LED's and contain 2x PWM output.
G3D Worldwide: http://gadgets3d.com/g3d-cp-fs
G3D Europe: http://gadgets3d.eu/g3d-cp-fs
G3D eBay: http://stores.ebay.com/g3d
3. We have conducted a survey among our customers as well as among people strongly connected with the RepRap community - we asked what kind of problems are frequently encountered during the process of making your own RepRap printer?
The answer was very straightforward: Difficulties in the accessibility of parts, long periods of time required to gather all necessary parts to assemble the printer. Surely, each one us has had to order parts from many sellers, pay for shipping a few times, and finally wait until all the packages arrive at their destination. Later came the time-consuming task of searching for the instructions of assembly, printer configuration settings and software.
We want the RepRap to be in most homes - that is why all the necessary parts required to build your own printer will be available in our offer.
We are currently preparing some last things, in order to make available to you ready materials and elements to build your own 3D printer for a low price.
The star of this summer is the RepRap Mendel Max 1.5, which will be avaialble in a few days. Shortly, the RepRap Prusa i3 will also be available in our offer :)
G3D Mendel Max 1.5 ($499/379€)
Join us on Facebook, the daily news about 3D printing technology :)
Facebook: www.facebook.com/gadgets3d
All the best,
Rafal
GADGETS3D